Electrical
Brushed Pewter, Lamp Kit, With 10" Harp & Push Through Socket, Includes 1 Each Of The Following: 10" Brushed Pewter Lamp Harp, 8', 18 Gauge Silver Spt-1 Lamp Cord With Polarized Plug, Nickel Finish Push Through Socket, 660W, 250V Rated, 1" 1/4-27 Thread Nickel Finish Finial, Lamp Nipple, Coupling & Lock Nut.
12 Pack, 1/8 IP, Brass Finish, Check Ring, Assorted Sizes, Decorative Highlight To Cover An Opening On A Lamp Or Light Fixture, Use On A Lamp Made From A Bottle To Conceal The Bottle Adapter, Use With A Rubber Washer Over The Glass Shade On A Light Fixture To Cushion The Glass.
5"D, White, Modern Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws, Includes 1 Each Of The Following: 5" White Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer & 1/8 IP Lock Nut & 2 Each 8-32 x 1-1/2" Mounting Screws.
5"D, Oil Rubbed Bronze, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Brass Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Antique Brass Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, Brushed Pewter Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, White Finish, Traditional Canopy Kit, 7/16" Center Hole, Decorative Piece Used To Cover The Outlet Box & Hang A Ceiling Fixture, Uses A Crossbar Lockup, Securing The Canopy To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Canopy, 1" 1/8 IP Loop, 1/8 IP Lock Washer, 1/8 IP Lock Nut, Offset Crossbar & 2 Each Of The Following: 8-32 x 1" Mounting Screws, 8-32 x 1/2" Mounting Screws, & 8-32 Cap Nuts.
5"D, White, Blank Up Kit, Screw Holes 2-3/4" Apart, Decorative Piece Used To Cover The Outlet Box After Removal Of An Existing Ceiling Fixture, Uses A Crossbar Lockup, Securing The Blank Up To The Crossbar With Screws & Cap Nuts, Includes 1 Each Of The Following: 5" Blank Up Canopy & Offset Crossbar & 2 Each Of The Following: 8-32 x 1-1/2" Mounting Screws & Brass Cap Nuts.
3-1/4"D, Brass Finish, Glass Shade Holder, Use To Install A New Light Fixture, 250V Rated, For Use With A Medium Base Bulb, 60W Maximum, Holds A Glass Fitter Shade, Not Included, Which Is Held In Place By Tightening The Fitter Screws, Includes 1 Each Of The Following: Glass Shade Holder With 18 Awg Pre-Wired 6" Insulated Leads, Ground Wire & Insulation, 4" Offset Crossbar & Grounding Screw, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws, 8-32 x 2" Mounting Screws & 3 Each Knurled Screws.
4"D, Brass Finish, Glass Shade Holder, Use To Install A New Light Fixture, 250V Rated, For Use With A Medium Base Bulb, 60W Maximum, Holds A Glass Fitter Shade, Not Included, Which Is Held In Place By Tightening The Fitter Screws, Includes 1 Each Of The Following: Glass Shade Holder With 18 Awg Pre-Wired 6" Insulated Leads, Ground Wire & Insulation, 4" Offset Crossbar & Grounding Screw, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws, 8-32 x 2" Mounting Screws & 3 Each Knurled Screws.
Twin Cluster Ceiling Kit, Used To Install A New Light Fixture, 250V Rated , For Use With 2 Medium Base Bulbs, 50W Maximum, Holds A Glass Diffuser, Not Included, Which Is Held In Place By The Brass Finish Lock Up Cap & Rubber Washers, Includes 1 Each Of The Following: Canopy, 2 Bulb Cluster Socket With 18 Awg Pre-Wired 8" Insulated Leads, 4" Offset Crossbar & Brass Finish Lock Up Cap, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws & 1/8 IP Rubber Washers.
2 Pack, 1/8 IP, Brass Finish, Lock Up Cap, Secures Center Mount Glass Shade To A Ceiling Fixture, Replaces Missing, Worn, Or Outdated Lock Up Caps.
2 Pack, 1/8 IP, Nickel Finish, Lock Up Cap, Secures Center Mount Glass Shade To A Ceiling Fixture, Replaces Missing, Worn, Or Outdated Lock Up Caps.
1/8 IP, Brass Finish, Lock Up Kit, Secures A Center Mount Glass Shade To A Ceiling Fixture, Include 1 Each Of The Following: 1-1/8" Check Ring, 1/8 IP Lock Up Cap & 1/8 IP x 1"OD White Rubber Washer.